Rick,

I believe the following snip is part of a stock scam. But the company involved may for real. A foamed aluminum structual part means you would be able to have fixtures in many shapes that can not be produced by extrusion. If you have been frustrated by the shapes available, this might be a lead. (I A9ed (like googled) it and got nothing.)

Again - caution - I consider this to be a stock scam.

Pinnacle Group Limited, Inc. (PGPU) Announces Acquisition of AEROFOAM METALS INC. AEROFOAM METALS INC is a |eading structura| technology company focused on the development & commercia|ization of foamed a|uminum products and components for the world market. In Today's market, AEROFOAM METALS INC has cutting edge techno|ogy and |itt|e competition.

Symbo|: PGPU.PK

Bobby

Rick,

The following claims to be your transparent PV. It sounds like it is still in a research stage. We might contact them about being a test site.

http://press.arrivenet.com/bus/article.php/649956.html

One more piece of the puzzle.

Maybe I'm being overly sceptical today, but there may be cause for concern here also:

In November, they bought this name - the product has nothing to do with their claims:

http://biz.yahoo.com/pz/040908/63545.html

What they bought is here:

http://www.powerglass.co.uk/tech.html

Bobby

« May 2005 · July 2005 · February 2012 »

June 2005
MonTueWedThuFriSatSun
  0102030405
06070809101112
13141516171819
20212223242526
27282930   

Calendar:

  • 25.06.2005: Rick,
  • 24.06.2005: Building materials - status of wood supply
  • 19.06.2005: New Technologies Promise to Revolutionize the Solar Power Industry
  • 18.06.2005: Finding a page already created
  • 17.06.2005: A title line is quoted on the Profiles page and in the right column so that visitors get an idea of the general topic. Today some exciting software for wiki information maps.
  • 15.06.2005: 92% of Americans say that they are worried about dependence on foreign oil
  • 14.06.2005: At left.
  • 11.06.2005: The issue of food production in an arcology
  • 07.06.2005: prefab double-layer covering system for a greenhouse
  • 05.06.2005: There is quite an active discussion about 3D CAD design and drawing tools happening at the yahoo forum and I believe that it would help to establish a group specifically to document and discuss these tools and to how we can coordinate our collaboration by suggesting good drawing software that we could all use and therefore make collaboration easier. I will call this the Design In 3 D and see if some members can help to get it established, since I have so little knowledge of these drawing software. - Rick

Tuesday, 14 June 2005